Blog

2021 Scania SDP3 V2.48.6 V2.40 Diagnostic Software Free Download

14 Feb 22 - 22:32

What is Scanica SDP3?

Scania SDP3 is a PC-based diagnostics application software for Scania trucks, bus chassis and Scania engines. The Scania SDP3 application includes fault code reading, assisted trouble shooting, parameter settings and more. SDP3 shall be installed on a PC/Windows platform, and connect to the vehicle through a vehicle communication interface (VCI).Why Choose Scanica SDP3?

Today’s vehicles and especially today’s electrical systems with their control units and distribu...

How to connect the Launch X431 scan tool and a Scope

14 Feb 22 - 22:16

We get same question from many customers”I have a launch x431 scanner,Does it support connect a Scope?”

Until now,only Launch X431 V Pro,V+ and pad can be connect a Scope.

So here is a tips for you.

1.Device: Launch X431 Scan tool,Scope,USB Transfer cable.

2.Install a Scope software on your phone.

3.Connecting the Scope and Launch X431 Scanner.

4.Testing it on car and get the data.

BMW F-CHASSIS AUTO STARTSTOP PERMANENT OFF CODING BY LAUNCH X431 PAD VII

22 Jan 22 - 07:20

This post comes with the tutorial of Auto Start/Stop Permanent Off Coding for BMW F-Chassis by using Launch X431 Pad VII.

Here is the specific procedure:
In the main menu, select Local Diagnose

Then select European>> BMW
Read vehicle version info and click OK
Select Automatically Search
Confirm the vehicle info and click NEXT

Then you can see if the car module is normal
In System Topology, it shows the ZGM is abnormal

In System list, there is a fault in the ZGM (C...

XTOOL X100 PAD “Stay on the loading page” Solutio

22 Jan 22 - 07:12

Problem: after booting the XTOOL X100 PAD, I select the OBD2 function, unfortunately, it stays on the loading page.

Obd2tool Solution:

1. Open “quicksupport” on the tablet, and you will have one ID (shown as below), click on “Send my ID”.

2. Accept the request from Xtool Tech Supportto connect your tablet.

3. Wait to download the software remotely.

4. Alright, the bug is fixed.

Hope it helps!

How to use MB Star software to code Mercedes W212 W204 X204 Turn Signal

16 Dec 21 - 02:37

In this instruction, OBD2TOOL will show you guide on how to use Vediamo to code for Mercedes Benz change turn signal.

Look, the turn signal flashes 3 times.

Now we are coding with Mercedes Benz Vediamo so that the turn signal blinks 4 or 5 times. Firstly connect a Mercedes diagnostic tool (i.e MB SD C4, C5, Benz DoIP C6 etc) to the car.

ECU Properties and then click on the three options to confirm the reset.

Click on “Coding” and then “Variant Coding”.

After s...

Accessing Prognostics Download on Caterpillar ET Software

16 Dec 21 - 01:09

Accessing Prognostics Download on Caterpillar ET Software

#Purpose
Prognostics Download allows Prognostics data to be downloaded quickly and easily from all available ECMs. This information can be saved as a text file (.txt), refer to Figure 1.1 above.

When information is downloaded and analyzed at regular intervals, certain types of Histograms and cumulative data can be valuable in identifying repairs before failure occurs. Repairs before failure provide lower repair cost and improved...

How to Reprogram TPMS Sensor for Chevrolet Silverado

29 Oct 21 - 03:10

If you find your vehicle TMPS sensor broken,you need replace and reprogram it to make it work. So in this instruction Obd2tool.com show you guide on how to use LANUCH X431 device to reprogram TPMS sensors.

Preparations:

Launch X431 device

Launch RF TPMS sensors

Launch X431 TSGUN

Procedures:

Connect Launch X431 device to Launch TSGUN by bluetooth

Go to TPMS menu on Launch X431 device

Select “CHEVROLET”–>”Silverado”

Select “2015/01-2019/12(433MHz) K2XC”

The...

How to fix BMW ISTA+ “Display” Function is blank

29 Oct 21 - 02:15

Problem: BMW ISTA+ “Display” Function isn’t working, files were downloaded from forum, all files were extracted and unblocked. Car can be identified and fault tree is shown. Everything works fine, but when I create a test plan for faults and click ‘display’, the next page is blank and ends up semi-freezing the program.

How to fix BMW ISTA+ “Display” Function is blank?

To do a fresh installation again,

Disconnect from internet,

Stop antivirus programs, windows defender or any s...

How to Update & Re-flash MB SD C5C4Plus Firmware

05 Oct 21 - 23:30

Here we share the procedure to update and re-flash C5 DOIP/C4Plus, in case if something about firmware goes wrong you may need it.

1.Procedure to update firmware:

Notice: MB SD C5 needs six AA batteries while DOIP MB SD C4 Plus doesn’t.

Connect the device to OBD port or 12V power by main cable.

Path 1. C:Program FilesMercedes-BenzSDConnect Toolkit

Path 2. C:Program FilesSoftingDiagnostic Tool Set 88.03InterfacesDCDI_DPduApieCOM_Toolkit

In both folder, swi...

Launch X431 PAD III VS X431 PAD V VS X431 PAD VII

05 Oct 21 - 23:27

Launch X431 Pad III, X431 PAD V and X431 PAD VII are professional and comprehensive diagnostic scan tools. They can do full system diagnosis, advanced programming, and a lot of special functions for wide car models. So what’s the difference? Which is better to choose? Here has listed the differences among them for reference.

To sum up:

1.These Launch X431 PAD series scanners come with different hardware.
Display: X431 PAD VII> X431 PADV= X431 PADIII
Memory: X431 PAD VII> X431 PADV> ...